EM-Smart BASIC

Small in form factor but with hudge possibilities, optionally with a rotary attachment.
em-smart-basic-banner
The EM-SMART BASIC fiber laser is a device for permanent marking on metals and some plastics. It is made for small businesses or advertising agencies. Small dimensions, low energy consumption, and light structure are an additional advantage over the competition.

Permanent engraving on metal

With the EM-Smart BASIC laser, you can permanently mark any metal in just a few seconds! Combining an 18W MAXphotonics laser source with an engraving speed of up to 7000mm/s will allow you to make even a large production batch in a few moments. The 110x110mm working area means an amazing focus of the laser beam. The size of the focused laser point is thinner than a human hair – thus, you do not have to worry about the accuracy and legibility of even the smallest letters.
You will perfectly mark materials such as:
  • Steel and hard metals

  • Raw and anodized aluminum
  • Precious metals
  • Brass and copper
  • Titanium and titanium alloys
  • PC (Polycarbonate)
  • PA (polyamide)
  • ABS
  • PET-G

Wide range of focus adjustment

EM-Smart BASIC has a wide range of focus adjustments. This allows you to engrave objects up to 20cm high.

Due to the wide height adjustment range, this laser is also available with a rotary attachment.

20 cm

Range of height adjustment

Round? - not a problem!

EM-Smart BASIC is also available with a rotary attachment (BASIC +R version). The rotary attachment has a tilt range from 0 ° to 90 ° and a maximum gripping diameter of 10 cm. It will allow you to mark round objects such as: rings, bracelets, thermoses, etc. You must remember that when you buy EM-Smart BASIC in the standard version, it is NOT later possible to extend it with a rotary attachment. The EM-Smart BASIC +R version differs in the electronic components inside the machine.
from 0° to 90°

Tilt range

do 10cm

Rotary max diameter mount

EM-Smart PC (option)

Plug & Play – with a build-in computer, the all-in-one EM-Smart PC will be the ultimate compact solution for your marking and engraving business. With its compact design and build-in computer, this all-in-one machine is the perfect choice for businesses looking for a plug-and-play solution for their marking and engraving needs.

Ease of use

Quick montage

EM-Smart BASIC must be assembled before use. In just a few minutes, using the 12 included screws, you can assemble your engraving machine from three main elements.

Integrated perforated work table

It is easy for you to securely attach the included positioning elements directly to the machine table - which ensures safety during work.

Works with various files

Ez-Cad software allows you to import many popular files, incl. bmp, jpg, gif, plt, png, ai, dxf or dst.

In small form factor, EM-Smart BASIC hides endless possibilities

Low weight

Only 12.5 kg of weight allows for easy laser mobility. You can move it without a problem.

Work safety

The safety button available on the machine’s front panel and built-in electronic components allow for safe operation.

18W Power output

EM-Smart BASIC has an 18-watt MAXphotonics laser source, which guarantees the quality of the inside components. The assumed lifetime of 100,000 hours only confirms the quality of the components used.

Low power consumption

Power consumption of only 120W during operation is one of the best results in the class of Fiber lasers, which can consume nearly 800W.

Compare all EM-Smart models

A list of all EM-Smart models will help you choose the most suitable model for you
em-smart-basic-side
  • Weight 12,5 kg
  • Size 305 x 435 x 525 mm
  • Working area 110 x 110 mm
  • Laser power 18W FIBER Laser
  • Speed 0 – 8000 mm/s
  • Operating system Windows 7, 8, 10, 11
  • Operating temperature from 15 to 35 degrees Celsius
  • Wavelength 1064 nm
  • Energy consumption up to 160W
  • Max. item height 200 mm
  • Rotary attachment range from 9mm to 100mm EM-SMART BASIC R
  • Rotary attachment angle range from 0 to 90° EM-SMART BASIC R
  • Communication with the machine USB Cable
  • Contents Laser, protective glasses, flash drive with software, USB cable
Find out more about EM-Smart BASIC
  • Weight 14 kg
  • Size 325 x 437 x 525 mm
  • Working area 150 x 150 mm
  • Laser power 20W / 30W MOPA JPT FIBER Laser
  • Speed 0 – 8000 mm/s
  • Operating system Windows 7, 8, 10, 11
  • Operating temperature from 10 to 40 degrees Celsius
  • Wavelength 1064 nm
  • Energy consumption up to 160W
  • Max. item height 150 mm
  • Rotary attachment range from 9mm to 100mm EM-SMART MOPA R
  • Rotary attachment angle range from 0° to 90° EM-SMART MOPA R
  • Communication with the machine USB Cable
  • Contents Laser, protective glasses, flash drive with software, USB cable
BUY NOW
  • Weight 12,5 kg
  • Size 305 x 435 x 525 mm
  • Working area 110 x 110 mm
  • Laser power 25W FIBER Laser
  • Speed 0 – 8000 mm/s
  • Operating system Windows 7, 8, 10, 11
  • Operating temperature from 15 to 35 stopni Celsjusza
  • Wavelength 1064 nm
  • Energy consumption up to 180W
  • Max. item height 200 mm
  • Rotary attachment range from 9mm to 100mm EM-SMART BASIC 2R
  • Rotary attachment angle range from 0 to 90° EM-SMART BASIC 2R
  • Communication with the machine USB Cable
  • Contents Laser, protective glasses, flash drive with software, USB cable
Find out more about EM-Smart BASIC 2
  • Weight 8,5 kg
  • Size 258 x 440 x 485 mm
  • Working area 110 x 110 mm
  • Laser power 18/25W FIBER Laser
  • Speed 0 – 8000 mm/s
  • Operating system Windows 7, 8, 10, 11
  • Operating temperature from 10 to 35 degrees Celsius
  • Wavelength 1064 nm
  • Energy consumption up to 160/180 W
  • Max. item height 90 mm
  • Rotary attachment range from 2mm to 70mm EM-SMART NOVA R
  • Rotary attachment angle range from -20° to 20 EM-SMART NOVA R
  • Communication with the machine USB Cable
  • Contents Laser, protective glasses, flash drive with software, USB cable
Find out more about EM-Smart NOVA
  • Weight 10 kg
  • Size 260 x 440 x 505 mm
  • Working area 110 x 110 mm
  • Laser power 20W FIBER Laser
  • Speed 0 – 7000 mm/s
  • Operating system Windows 7, 8, 10, 11
  • Operating temperature from 15 to 35 degrees Celsius
  • Wavelength 1064 nm
  • Energy consumption up to 120W
  • Max. item height 100 mm
  • Rotary attachment range from 2mm to 70mm EM-SMART ONE R
  • Rotary attachment angle range from -20° to 20 EM-SMART ONE R
  • Communication with the machine USB Cable
  • Contents Laser, protective glasses, flash drive with software, USB cable
Find out more about EM-Smart ONE

Versatile use cases

EM-Smart will work in many industries

EM-Smart will work perfectly in many industries.
The EM-Smart laser will work in many industries, both on the production line, where you can mark serial numbers on your items, and in an advertising company. You can make number plates, prints on gadgets or other permanent markings on the metal.

The EM-Smart Basic + R version with a rotary attachment will be a supplement wherever you need to mark round objects: tools, sleeves, thermal mugs and other round things. Because the rotary attachment can tilt – jewelers can mark rings with a pattern on the outside and a description inside the ring.

USEFUL ACCESSORIES

Increasing the quality and safety of work

Security enclosure

It protects your eyes from the laser beam during work. For complete safety, safety glasses are always included with the machine!

EM-Smart filter

A quiet and compact filter for lasers with a large air flow of 200m3 / h, a rotating inlet pipe with an additional suction tip and three filters that capture smoke, dust and harmful gases.

Foot switch

Foot switch used during repetitive work. It allows you to trigger the laser beam after changing the marked object without the help of a computer (``Enter`` button) in continuous operation mode.

Free engraving test

Send us your product - we will make for you a free test on EM-Smart laser so you can see the real-live results.

Training included

To each laser, we offer simple video documentation, tutorials, and online training for devices purchased from us

Laser presentation

We also invite you to familiarize yourself with the device at the online show or in our showroom. We will present the assembly and operation of the laser.

ADDITIONAL TRAINING

Our specialists can prepare additional hardware and software training for EM-Smart lasers.

CONTACT FORM

Have questions? Write to us!

If you have any questions, write to us. Our specialist will contact you to discuss the topic.

 

Wyślij wiadomość