EM-Smart MOPA
The new laser engraving machine for stainless steel in color
Compact fiber laser engraver with new possibilities. Thanks to the EM-Smart MOPA, you can mark stainless steel in color and anodized aluminum in black – and all this in an unprecedentedly small device.
Laser source of EM-Smart MOPA
EM-Smart MOPA has a JPT fiber laser source with a power of 20W or 30W. This laser source uses the variability of the pulse duration in the range from 2 to 500ns. MOPA will allow you to achieve a result equivalent to a typical fiber laser in a shorter marking time, thanks to the precise management of the power of the laser source. Compared to the EM-Smart ONE or EM-Smart BASICS fiber lasers, the frequency and pulse width of the JPT fiber laser are independently controlled. By adjusting and matching these two parameters, we can mark a wider range of materials with greater marking contrast. Thanks to the MOPA laser, you have greater possibilities of marking plastics, obtaining a wider range of possibilities. Optional version with a rotary attachment.
Color engraving is now possible!
The MOPA laser allows you to achieve engravings on stainless steel in up to 32 colors thanks to the ability to adjust the frequency and duration of the laser pulse. By adjusting both parameters, the MOPA laser will allow you to obtain a higher contrast engraving on a wide range of metals and plastics. Black engraving on anodized aluminum, colored on stainless steel, white on black plastic. Thanks to the precision of the generated power, the MOPA laser will reduce possible melting during the engraving of plastics and will achieve the highest quality final effect. Color engraving is now possible!
20 / 30 W
High power
8000m/s
High speed
Who is EM-Smart MOPA for?
EM-Smart MOPA has a wider range of possibilities compared to EM-Smart ONE or BASIC lasers. MOPA is mainly used for marking various metal materials or black engravings on anodized aluminum. What distinguishes the EM-Smart MOPA is the fact that you can achieve a deeper contrast on metals and plastics. Using a laser point four times thinner than the thickness of a human hair – the sharpness of even the smallest letters is ensured.
Mechanical parts
High-quality marking can be obtained on: bearings, gears, screws, nuts, shafts, and all kinds of small metal elements.
Electronic components
Thanks to the EM-Smart MOPA, you can work on such products as: resistors, capacitors, chips, printed circuit boards, keyboards, etc.
Personalization
Ease of use of Ez-Cad. You can easily make a personalized inscription on handicrafts or everyday objects, like zippers, key holders, keyrings, pens, sanitary ware, etc.
Tools
We can mark: knives, tools, measuring tools, cutting tools, etc.
Identification
Marking of rating plates, descriptive plates, precision or medical equipment.
The small size of the EM-Smart MOPA hides many possibilities
Compare all EM-Smart models
A list of all EM-Smart models will help you choose the most suitable model for you
- Weight 14 kg
- Size 325 x 437 x 525 mm
- Working area 150 x 150 mm
- Laser power 20W / 30W MOPA JPT FIBER Laser
- Speed 0 – 8000 mm/s
- Operating system Windows 7, 8, 10, 11
- Operating temperature from 10 to 40 degrees Celsius
- Wavelength 1064 nm
- Energy consumption up to 160W
- Max. item height 150 mm
- Rotary attachment range from 9mm to 100mm EM-SMART MOPA R
- Rotary attachment angle range from 0° to 90° EM-SMART MOPA R
- Communication with the machine USB Cable
- Contents Laser, protective glasses, flash drive with software, USB cable
- Weight 12,5 kg
- Size 305 x 435 x 525 mm
- Working area 110 x 110 mm
- Laser power 25W FIBER Laser
- Speed 0 – 8000 mm/s
- Operating system Windows 7, 8, 10, 11
- Operating temperature from 15 to 35 stopni Celsjusza
- Wavelength 1064 nm
- Energy consumption up to 180W
- Max. item height 200 mm
- Rotary attachment range from 9mm to 100mm EM-SMART BASIC 2R
- Rotary attachment angle range from 0 to 90° EM-SMART BASIC 2R
- Communication with the machine USB Cable
- Contents Laser, protective glasses, flash drive with software, USB cable
- Weight 12,5 kg
- Size 305 x 435 x 525 mm
- Working area 110 x 110 mm
- Laser power 18W FIBER Laser
- Speed 0 – 8000 mm/s
- Operating system Windows 7, 8, 10, 11
- Operating temperature from 15 to 35 degrees Celsius
- Wavelength 1064 nm
- Energy consumption up to 160W
- Max. item height 200 mm
- Rotary attachment range from 9mm to 100mm EM-SMART BASIC R
- Rotary attachment angle range from 0 to 90° EM-SMART BASIC R
- Communication with the machine USB Cable
- Contents Laser, protective glasses, flash drive with software, USB cable
- Weight 8,5 kg
- Size 258 x 440 x 485 mm
- Working area 110 x 110 mm
- Laser power 18/25W FIBER Laser
- Speed 0 – 8000 mm/s
- Operating system Windows 7, 8, 10, 11
- Operating temperature from 10 to 35 degrees Celsius
- Wavelength 1064 nm
- Energy consumption up to 160/180 W
- Max. item height 90 mm
- Rotary attachment range from 2mm to 70mm EM-SMART NOVA R
- Rotary attachment angle range from -20° to 20 EM-SMART NOVA R
- Communication with the machine USB Cable
- Contents Laser, protective glasses, flash drive with software, USB cable
- Weight 10 kg
- Size 260 x 440 x 505 mm
- Working area 110 x 110 mm
- Laser power 20W FIBER Laser
- Speed 0 – 7000 mm/s
- Operating system Windows 7, 8, 10, 11
- Operating temperature from 15 to 35 degrees Celsius
- Wavelength 1064 nm
- Energy consumption up to 120W
- Max. item height 100 mm
- Rotary attachment range from 2mm to 70mm EM-SMART ONE R
- Rotary attachment angle range from -20° to 20 EM-SMART ONE R
- Communication with the machine USB Cable
- Contents Laser, protective glasses, flash drive with software, USB cable
Versatile use cases
EM-Smart will work in many industries
The EM-Smart laser will work in many industries, both on the production line, where you will be able to mark serial numbers on your items, as well as in an advertising company. You can make nameplates, prints on gadgets, or make other permanent markings with it.
The EM-Smart MOPA version allows you to achieve engravings on stainless steel in up to 32 colors. It will enable you to obtain a higher engraving contrast on a wide range of metals and plastics. Black engraving on anodized aluminum or colored engraving on stainless steel.
USEFUL ADDITIONS
Increasing the quality and safety of work
Foot switch
Foot switch used during repetitive work. It allows you to trigger the laser beam after changing the marked object without the help of a computer (``Enter`` button) in continuous operation mode.
EM-Smart filter
A quiet and compact filter for lasers with a large air flow of 200m3 / h, a rotating inlet pipe with an additional suction tip and three filters that capture smoke, dust and harmful gases.
Security enclosure
It protects your eyes from the laser beam during work. For complete safety, safety glasses are always included with the machine!
Free engraving test
send us your product - we will make for you a free test on EM-Smart laser so you can see the real-live results.
Training included
To each laser, we offer simple video documentation, tutorials, and online training for devices purchased from us
Laser presentation
We also invite you to familiarize yourself with the device at the online show or in our showroom. We will present the assembly and operation of the laser.
ADDITIONAL TRAINING
Our specialists can prepare additional hardware and software training for EM-Smart lasers.
CONTACT FORM
Have questions? Write to us!
If you have any questions, write to us. Our specialist will contact you to discuss the topic.
